JUPITER Smart Band

SMARTBAND
NH-SB
USER MANUAL

READ CAREFULLY AND KEEP
hank you for choosing an NIH product. Please read the
instructions in this manual carefully.
Your NIAH smartband is guaranteed by Techmade S.r.l. for a
period of two years from the date of purchase according to the
terms and conditions of the warranty. Proof of purchase requires
a copy of your receipt and the authorized retailer's stamp on
the warranty certificate in the designated space. The warranty
covers defects in materials and workmanship. Your smartband will
be repaired free of charge by one of our Service Centers. The
warranty will be void if the smartwatch is tampered with or
repaired by anyone other than the Techmade S.r.l. service
network in Italy.
During the warranty period, the only components covered by the
warranty for defects in materials and workmanship are the
internal electronic components of the smartwatch. A component
covered by the warranty will be repaired free of charge or the
smartwatch will be replaced if defects in materials or
workmanship are found under normal use. In the event of a
replacement, Techmade S.r.l. cannot guarantee that you will
receive a smartband of the same model. If the requested model is
unavailable, it will be replaced with a smartband of equal value
and similar style.
This warranty does not cover the following:
• Damage and/or malfunction resulting from improper use, lack of
care, accidents, normal wear and tear, or liquids (e.g., water).
If warranty service is required, please send the smartband, a
copy of the retailer's receipt, the warranty certificate, and a
description of the problem to the nearest authorized service
center (for more information, please email assistenza@techmade.eu).
For repairs not covered by this warranty, the service center may
perform the requested services at a cost that will depend on the
smartband model and the type of service requested. These fees
are subject to change. These fees will be communicated and must
be accepted before the services are performed. Shipping costs
and other costs other than those of the warranty repair are the
responsibility of the smartband owner. The battery, in the case
of the smartband, is inserted at the time of manufacture.
Therefore, its lifespan may be shorter than the technical
specifications illustrated in our instruction manual. All
smartbands are made of aluminum alloy and/or steel alloy and/or
plastic produced in P.R.C.
The smartbands are manufactured with hypoallergenic materials in
full compliance with current Italian and international
regulations.
MAINTENANCE AND WARRANTY
All NIAH smartbands are built with highly professional technical
criteria, using innovative, quality-tested materials.
NIAH smartbands are freshwater resistant but are not suitable
for diving or water sports, as this could compromise the
effectiveness of the seals.
For all models, it is recommended not to press the buttons or
pull the crown out when in direct contact with water.
WARRANTY SERVICE
To obtain warranty service, the customer must present a copy of the retailer's receipt, a description of the problem, and the warranty certificate duly completed, stamped, and dated by the retailer from whom the smartband was purchased. Postage and insurance costs for shipping the smartband to an authorized service center are the sole responsibility of the owner.
INTERNATIONAL WARRANTY
Your smartband is guaranteed for twenty-four months from the
date of purchase according to the conditions specified in this
document. This warranty is valid internationally and covers any
defects in materials and workmanship.
THE WARRANTY IS VALID ONLY IF COMPLETED CORRECTLY AND IN FULL
WITH: THE DATE OF PURCHASE, THE STAMP AND SIGNATURE OF THE
OFFICIAL DEALER, AND PROOF OF PURCHASE.
The following are excluded from the warranty: the battery,
strap, bracelet, and any damage caused by improper use,
negligence, impacts, accidents, and normal wear and tear.
NIAH
Trademark: Techmade S.r.l.
Product Code/Ref.: NH-SB
Description: Smartband
Battery Type: Li-polymer
All essential test series have been performed and the
above-mentioned product complies with all legal requirements.
This device complies with the essential requirements and other
relevant provisions of Directive RED 2014/53/EU. All essential
radio test series have been performed.
Limitations in intended use or foreseeable misuse.
1. Do not disassemble the device. If repairs are necessary,
contact a sales center or authorized service center nearest you
(for more information, please contact
assistenza@techmade.eu).
2. It is recommended to keep away from electrical equipment.
3. Do not subject the device to shock, impact, or vibration.
4. Keep away from heat sources (e.g., radiators or stoves).
5. Do not handle the device with wet hands while it is charging.
This could cause electric shock or serious damage to the device.
6. If immersed in salt water, rinse immediately with fresh water
to avoid any damage. Therefore, we recommend avoiding immersing
the device in salt water whenever possible to avoid damaging the
metal components (case, buckle, etc.) due to the corrosive
agents it contains.
7. Dropping or impacting the device may damage the water
protection.
8. Do not charge the device near flammable materials, which
could catch fire due to the heat generated.
9. Take care of the battery charging port. The battery can be
recharged hundreds of times before needing to be replaced.
10. NIAH is not responsible for performance issues caused by
applications from vendors other than NIAH.
11. Do not modify the product in any way. NIAH is not
responsible for performance issues or incompatibilities caused
by modifying registry settings or operating system software.
Attempting to customize the operating system may cause the
product or applications to malfunction.
12. This product is not a toy. Keep it out of the reach of
children and pets. Product contains small parts. Swallowing may
cause choking hazard.
13. Risk of explosion if battery is replaced with an incorrect
type.
14. Do not throw the battery into a fire or a hot oven, or
mechanically crush or cut a battery. Risk of explosion.
15. Do not leave the battery in an environment with extremely
high temperatures or extremely low air pressure. Risk of
explosion or leakage of flammable liquids or gases. Do not use
in low air pressure conditions at high altitudes or in extremely
high or low temperatures.
Battery
1. The battery provided for the product is a li-Polymer battery
without memory effect, which can be recharged at any time. Not
letting it completely discharge helps to prolong its life;
2. Do not attempt to remove or replace the battery;
3. The battery cannot be removed by the user but must be taken
to a dedicated recycling center. The substances contained in
this product and the battery may cause harm to the environment
or human health. Please dispose of it properly. (Regulation
2023/1542 on batteries)
Identify the characteristics of the personnel who will use
the machine (physical, competence) and the level of training
required for users
No particular training for use. Read the instruction
booklet.
Product warranty
24 months warranty for the final consumer and 12 months for
professional operators. Opening or attempting to open the
product will void the warranty and may constitute a safety
hazard.
Safety related
RF output power: 4 dBm
Frequency band: 2402-2480MHz
Handle the device gently. Protect the device from bumps and
falls.
Environmental (temperature, humidity)
Working temperatures: -0°C~45°C/32°F~113°F
Cleaning level
Use a soft, dry cloth. Do not use alcohol or other cleaning
solutions.
Battery charging
To charge the battery, use only the supplied cable. Do not
attempt to clean the unit with chemical solvents, as this may
damage the finish. Wipe with a clean, dry or slightly damp
cloth.
Waterproof
Smart rings rated 1 ATM (the smartwatch can withstand a
pressure equivalent to 10 meters deep) cannot be submerged in
water and are suitable for occasional splashes of water. The 1
ATM rating is also resistant to sweat, splashes of water, and
rain.
Drying
Do not try to dry the product using a microwave oven,
traditional oven, hairdryer or other sources of heat. Use a dry
cloth or mild detergent.
WEEE Instructions
The European Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) requires that these devices should
not be disposed of in the normal municipal solid waste stream,
but that they should be collected separately to optimize the
recovery and recycling flow of the materials they are made of
and prevent potential damage to health and the environment due
to the presence of potentially dangerous substances. The
crossed-out bin symbol is shown on all products to remind you of
this.
The waste can be taken to the appropriate collection centers, or
can be delivered free of charge to the distributor upon purchase
of a new equivalent device or without obligation to purchase for
devices smaller than 25cm. For further information on the
correct disposal of these devices, you can contact the relevant
public service.

![]() |
WASTE SORTING |
| FOLLOW THE INDICATIONS OF
YOUR MUNICIPALITY |
|
| Package
- Paper PAP 22 |
Instructions
1. Charging Instructions
Battery: 3.8V - 120mAh
Charge the device before use.To charge the device, insert the
USB port into a charger (5V 1A) or PC and place the smartband
correctly on the charging cradle.



2. Bluetooth connection
| Open
the app, set up your profile correctly and provide consent. |
| Go to the "Add Device" section. |
| Choose the correct device. |
| End |
3. Touch screen actions

| Status | LED INDICATOR | VIBRATION FEEDBACK |
| Power On | Blue LED flashes | Vibrates once |
| Pairing / Disconnected |
Green LED flashes | Connecting: Vibrates once Disconnect: None |
| Standby (Active) |
Green LED flashes (every 5 sec) |
None |
| Charging | Red LED solid | Vibrates once on connect |
| Fully Charged |
Green LED solid | Prompts once |
| Low Battery |
Red LED flashes (3 times every 5 min |
Prompts once |
| Power Off | Red LED flashes twice | Prompts once |

| SAFETY | EN IEC 62368-1:2020+A11:2020 |
| EMC | EN 55032:2015+A1:2020 |
| EN 55035:2017+A11:2020 | |
| EN 301489-1 V2.2.3 | |
| EN 301489-17 V3.3.1 | |
| RADIO | EN 300 328 V2.2.2 |
| HEALTH | EN 62479:2010 |
